About

This site has free downloads of old American file manufacturer catalogs, brochures, instructions, and history, including Canada where possible. The Site Index lists small companies with the large companies that bought them. The information is being updated as needed so please check back. Click on pictures to enlarge them.

Saturday, January 23, 2016

Western File Co., Great Western File Co.


Western File Company of Beaver Falls, Pennsylvania was founded in 1869 and made a limited company in 1873. In 1878 it registered the following trademarks with the US Patent Office: Economy Works with Cast Steel Files, Western File Works, Beaver File Works, Western Files, and Economy Works with Superior Files. Western File Company's 1883 catalog is on Archive.org.

When Nicholson File Co. took control in 1895, it formed a subsidiary, Great Western File Co., capitalized at $400,000, and operated it as the Great Western branch of the Nicholson File Co. Operations continued in Beaver Falls until 1904, when Great Western's production was moved to the former Arcade plant in Anderson, Indiana.

Thank you to a reader, Vance, for photo
The following history is from History of Beaver County Pennsylvania and its Centennial Celebration, by Rev. Joseph H. Bausman, 1904:

The works of the Great Western File Company, Limited, were built in 1869 by David Blake and James M. Fessenden. Four years later the capacity was doubled. In 1875 the firm was changed to a limited company, with James M. Fessenden, chairman; E. L. Blake, secretary; and F. F. Foshay, treasurer. On the 19th of April, 1880, the entire works were destroyed by fire, with an almost total loss, but in eighteen weeks they were rebuilt on a much larger scale and were again in active operation. In 1883 Hon. Henry Hice became chairman, and George W. Morrison, secretary and treasurer. In 1899 the Great Western File Works was absorbed by the present company, under the style of the Nicholson File Works. 
Hardware, 10 Sept. 1895
Hardware, 25 Sep. 1895














Iron Age, 1896

Saturday, January 9, 2016

Moore Brothers, Jamestown, New York

Moore Brothers ad, 1911
Moore Brothers was a manufacturer of hand saws, files, and auger bits, located in Jamestown, New York. According to their advertising, the business began in 1868. Fred Dalson Moore (1853-1928) and his son Fred D. Moore Jr. (1886-?) and grandson Fred D. Moore III (1910-1960) ran the business. Fred Dalson Moore patented a file for sharpening auger bits, 1 June 1886, US Patent 343136. Moore Brothers advertised their files frequently in trade publications from 1911 to 1914. A 1914 article in Building Age described their output:

Some interesting information relative to the leading lines of saws and files made by Moore Brothers Jamestown NY is contained in a 44 page catalogue which is being distributed among the trade. Special attention is called to the makers XX hand edge taper files which are made from the highest grade of steel and produced on machines operated by practical file makers. Special stress is laid upon the durability of these files and to the satisfaction which they give wherever introduced. The greater portion of the catalogue is devoted to the various lines of saws turned out by Moore Brothers who have had 46 years [1868] experience as saw and file makers. In connection with the various illustrations is brief descriptive matter together with sizes prices etc. Not the least interesting feature of the catalogue are the testimonial letters from some of the many who have handled and used saws and files of this concern, the list representing a wide range of territory.
Picture by Gary S.
Moore also used the name Empire State Saw & File Works in 1902, and used XX as a brand name for files and saws, as well as Empire State for saws. The etchings on Moore's hand saws were unusually informative, with one reading (commas added): Made from Jessop and Sons English Steel, Patent Ground, Furnace Bottom Temper, Double Extra London Spring Steel Warranted. Although usually referred to as Moore Brothers, the 1928 Jamestown city directory called them Moore Brothers Saw, File & Tool Corp. At some time between 1939 and 1942 manufacturing ceased and the name went back to simply Moore Brothers, with the business described as wholesale hardware dealers in 1942. Moore Brothers Catalog No. 36 is on Archive.org.

Moore Brothers was on the far side of Broadhead's Mills
Moore Brothers’ works was on East 1st Street, which has several surviving brick factory buildings but which has not been photographed by Google Street View. The addresses changed from 11-13 E. 1st (1901), 195 E. 1st Street (1932), 116 E. 1st St. (1936), and 118 E. 1st St. (1942). It’s possible that More rented space or was in the same building but the street was renumbered, common in the early 20th century. The works was next to the small Chadakoin River, and on the opposite bank was the well-known Crescent Tool factory.
Moore Brothers ad, 1914

Moore Brothers auger bit file

Tuesday, December 22, 2015

American File Co., Pawtucket, Rhode Island

American File Company, chartered May 1863, was unusual in that it started as a stock company with a large capitalization. It was also one of the first American file makers to mechanize. In 1882 they employed 200 men and had a capital of $500,000. Despite these advantages, American struggled financially and was bought by Nicholson File in 1890.

American File Works box

American File Co., photo by Gary S.
1890 Sanborn fire insurance map, New American File Co.
American's first works was at the corner of Main St. and Pine St., Pawtucket (see Google Street View below). The company failed, and this works was sold to Slater Cotton Co. The reorganized business incorporated in 1875 as New American File Co. The new works was at 152 Dexter St., Central Falls, adjacent to Pawtucket. The third location was in the block bounded by Dexter, Rand, Pine, and Mowry Streets, in Central Falls.

Pawtucket was a center of file-making, with about 9 firms in the late 19th century, with more information available at Early RI Toolmakers & Tradesmen.


Saturday, December 19, 2015

McCaffrey File Co.

Photo by Gary S.
Hugh McCaffrey and his younger brother John, began manufacturing files in Philadelphia, PA, in January 1863 under the name of McCaffrey and Brother. In July, 1889, the business was incorporated under the title of The McCaffrey File Company. McCaffrey File Co. was bought by Nicholson File Co. in 1926. This link is for several pages about McCaffrey in the 1913 Hardware Dealers' Magazine. McCaffrey's address was 1839 N. 5th St., just south W. Berks St., in the Kensington neighborhood. The factory was just north of the famous Stetson Hat Co. factory complex.

McCaffrey & Brother bill head, 17 Sept. 1885


















McCaffrey file box


1917 Sanborn map, McCaffrey File Co.
1913 Hardware Dealers' Magazine
How McCaffrey files were made

Thursday, December 17, 2015

Whitaker Manufacturing Co.

Whitaker Manufacturing Co. made hardware and agricultural specialties, including files, in Chicago, IL. They were in business from 1903 to at least 1974. The address in 1914 was 509 W. Monroe St., Chicago, and by 1917 it was 409-15 S. Green St., Chicago. Their files were branded Triple Diamond or Whitaker. One source from 1914 gives other brand names, but these may have been made by another company. In 1941, the factory was in Clearing, IL (now part of Chicago). Thank you to reader Gary S. for his assistance.

This link is to the hand tools section of Whitaker's Catalog No. 55 from 1941, and this is the 1941 Dealer's Discount Sheet for all of Whitaker's products.
Who's Who in Chicago and Illinois, Vol. 1, 1905
The Automobile Trade Directory, Vol 19, 1921

Saturday, December 12, 2015

Stokes Brothers Manufacturing Co.

Stokes Brothers Manufacturing Co. specialized in horse and shoe rasps. Their factory was at Bannard St. and Vought Ave. in Freehold, New Jersey. The building still exists. Stokes Brothers incorporated in 1888, according to their letterhead, and Heller Brothers of Newark, NJ took them over in 1943.

Thank you to reader Gary S. for the photo of his rasp.

This YouTube video shows Auriou rasps being cut by hand today at Forge de Saint Juery in France, as they were at Stokes Brothers over 100 years
ago.

Stokes Brothers factory





Friday, October 2, 2015

Hayes File Co.

Hayes File Co. made Swiss pattern files and imported them from Switzerland and France. The business began in 1870 according to their advertising, and were located at 474, 476, and 478 Franklin St., Detroit, and later at 1986 Franklin St. Hayes is still in business as Hayes Grinding Co.
The City of Detroit, Michigan, 1701-1922, Vol 5